SCHROTH's Profi II-6 is our most popular belt. It features the
2" lap Flexi Lap Belt, the T-bar sub strap and the standard 3"
shoulder belts. All points are wrapped in, so you can add almost
any end fitting for your specific application.
If you're looking for a HANS specific solution, select the Profi
II-6 HANS option above. The HANS specific shoulder belts are
designed to make HANS use safer and more comfortable. The belts
start as 3" webbing at the cam lock, then after the length adjuster
they are 2" webbing which fits completely on the HANS yoke. This
gives you the optimal force distribution, entirely on the surface
of the HANS. A standard 3" belt will work, however some of the load
is not distributed on the HANS. This also can be a comfort issue
with some of the webbing falling off the HANS. Another important
feature of the HANS specific shoulder belts is the ability to move
the anchor points towards each other to acheive the perfect
installation geometry. This will help in the Post-Impact phase -
very important in a roll-over situation as well.
The main reason behind the 2" lap belt is one of added safety. A
2" belt rides within the crest of the human pelvis where a 3" belt
would rest on the edges. This allows you to get the belt up to an
inch and a half tighter. That means the lap belt will be working
earlier in the accident event because it gets loaded faster. It's
also more comfortable and easier to adjust because there's less
friction through the adjuster.
Another feature unique to the Profi Series 2" lap belts is the
"Flexi Belt". The End Fittings and Cam Latches are wrapped into the
harness, making it so that the lap belt can be changed from a Pull
Up configuration to a Pull Down. This allows you to set the belt up
just the way you want it for your specific situation. It also
allows for Bolt In brackets to be wrapped in for the lap belts if
needed. Snap in brackets come standard on the laps.
Comes with Snap-In attachments at Lap and Sub points. The
Shoulders come ready to be wrapped around a roll-bar. Snap or Bolt
attachments can be purchased separately.
Available in Black, Blue, Red & Silver.
Made in Germany
