Rogue Engineering wheel spacers
start from 100% billet 6061-T6 aluminum round (not cut from plate).
From there, they are machined entirely on CNC lathes and mills to
ensure absolute roundness and thickness. Production runs are tested
at random to ensure absolute balance, trueness and
dimension.
Roge Engineernig's new
"window" design removes the maximum amount of weight possible from
the spacer itself. For example, their new 10mm spacer design
is 40% than a common German brand. With so much focus
on lightweight wheels, installing a wheel spacer in excess of 1
pound seems like a neglected oversight. Now, with RE's new
design, you can have your spacer while adding minimal weight to the
wheel assembly area.
Unique Features:
- Chamfered back face means the end
to spacers stuck on your wheels
- Thickness engraved on the front of
each spacer to eliminate guesswork
- M12 wheel lugs INCLUDED -
these required bolts are an additional purchase with other brands
(X5 requires 14mm lugs, not included)
The following spacer widths are a
available:
- 10mm
- 10mm Flat* (2 piece spacer)
[does not have window design]
- 12mm
- 15mm
- 18mm [does not have window
design]
All spacers fit BMW
5x120 bolt patterns with 72.5mm hub flanges (not E39, E70).
We do not produce any 4x100 patterns (older 3-series
BMWs).
* 10mm flat spacers are
for use on the FRONT hubs only and are not
compatible with E39, E46 Xi, E92 or E30 M3.
These spacers fit 5 lug BMWs (note
E39 specific spacer). Each set includes 2 spacers (one axle set)
and 10 lug bolts. Your wheels may or may not allow the use of 10
and 12mm spacers - please refer to pictures linked below to
determine correct use.
Made in the USA
|
Special Notes
about 10mm/12mm spacers
Note that the hub
contour height for use with our 10mm/12mm spacers requires a
maximum dimension of 11.5mm. Anything taller (such as rust buildup
or dust caps) can damage the spacer or even break off the
hubcentric lip machined onto the spacer. Please measure your hub to
ensure compatibility before ordering. Spacers
that are damaged because of excessive hub contour height are not
covered by Rogue Engineering's warranty policy.
10mm and 12mm spacers
require rims with chamfered hub faces. To determine if you have the
appropriate wheel, compatible with these spacers, see the following
pictures.
10mm/12mm spacers
OK
10mm/12mm spacers NOT
OK
Wheels found to be
incompatible with these 10mm/12mm spacers, because of an
insufficient rear chamfer depth, include the Kosei K1.
|
Wheel spacers ARE NOT RETURNABLE
if plastic packaging is opened.
CUSTOMER REVIEWS
There are currently no reviews of this
product.
Submit a Review
