Ground Control "tall" rear
shock mounts are designed for custom applications where reduced
droop is needed due to mounting a longer shock. The shock mounts
use the same billet construction, half-moon reinforcement plates,
and urethane bushings as the standard mounts. The only difference
is the 40mm of additional height to reduce droop travel for longer
shocks. Please contact us if your application is not included
Made in the USA
Note: Gaskets are not included but
Recovers travel on lowered cars
From Anonymous of Tampa, Florida on 4/24/2012.
These are great for lowered cars. They will require trimming of the trunk interior and sound insulation. With Bilstein Sport/ H&R Sport combo on an E36 4-dr, the rear suspension was on the bump stops. After installing the tall mounts, I recovered about 1 new bump stop worth of compression travel. I installed the stepped bushings in 'race' config.
is currently empty