Easy install - you
receive a complete bolt-in piece so no press is required to remove
factory bushing (you save $50-60 if you don't own a press, plus
Offset design adds
castor to improve suspension geometry. Arm is reconstructed so
there is no rotational load requiring adjustment or set screws, as
with a standard offset bushing.
accommodates E36 exhaust on E30 M50 conversions
Perfect solution when a
spherical bearing without a dust boot is not acceptable (i.e.
Extensively race and
All E30 3
All E36 3
All E46 3 Series
Z3 and MZ3
*Due to material and
design, attachment to E46 M3 under panel not allowed for or
Lifetime warranty on
bushing material. If used for racing, please verify that replacing
the bushing bracket is legal in your class.
Made in the
Great part if replacing FCAB or just for Tighter Handling
From Ken Lay of Cincinnati, Ohio on 7/27/2014.
I have them on my '98 e36 M3 with Dinan Stage 1 suspension. They tighten up the front end nicely with minimal increase in firmness/harshness over bumps (although the M3 is already fairly stiff, but by no means annoying). This is my DD in the summer and is used occaisionally on track for DE events. They are very easy to get on the control arm, but take a bit or persuasion to align them with the bosses on the chassis. A large phillips screwdriver helps to re-align the bracket to the bosses and get the bolts in smoothly. Great part.
A must for all e30s
From B Bercovitz of Bothell, Washington on 6/16/2014.
Second set on our E30 325i PRO3. Works well with the koni DA coilover setup. Robust design and very low maintenance. First ones were taken out by an off track excursion otherwise they would still be on there.
Should be the first suspension mod!
From Mike S. of Lynchburg, Virginia on 6/12/2013.
I have these on my DD and I track at DE's and this part has been a fantastic improvement on handling. While you feel bumps harder than the oem fcab, it's not unbearable or a dealbraker by any means.
From Brad of raleigh, North Carolina on 8/19/2006.
These bushing are great!!!can really feel the difference!!!
Excellent Performance and Price
From Joe Egan of La Mesa, California on 2/5/2006.
I use these on my daily driver and love 'em. ...cheaper than shop time to replace bushings on my stock lollypops - with better performance too!
is currently empty
BimmerWorld "DSC OFF" T-Shirt with your order of over $100
(not including shipping, or the shirt) -
you MUST add to cart to receive the free shirt.